Rechercher

A systematic framework has been created that facilitates the definition of the requirements of simulation models for certain applications and driving manoeuvres in a standardized manner. For this purpose, the proposed framework systematically divides the vehicle model into model classes and all model classes into different model types, corresponding to various model characteristics and common…

fireplaces and appliances intended to be vented through the throat of a masonry fireplace. These appliances are designed for burning solid fuels such as wood and coal. 1.2 This Standard covers catalytic combustors utilized with fireplace inserts. 1.3 Fireplace inserts and hearth-mounted stoves as covered by this standard are not certified for installation in factory-built fireplaces within…

1.1 La présente norme s’applique aux poêles sur socle et aux foyers encastrables préfabriqués pour les foyers en maçonnerie et les appareils dans lesquels l’évacuation d’air se fait par la gorge du foyer en maçonnerie. Ces appareils sont conçus pour brûler des combustibles solides comme du bois et du charbon. 1.2 Cette norme porte sur les chambres de combustion catalytiques utilisées avec les…

1.1 These requirements apply to Factory-Built Type A Chimneys, which do not require field fabrication. The chimneys are typically intended for use with gas and liquid fuel-fired residential appliances and building heating equipment, where the appliance or equipment flue-gas temperatures do not exceed 540 °C. 1.2 The chimneys are typically intended for use in accordance with regulatory Codes,…

1.1 These requirements cover the design and construction of Type L vents intended for the venting of flue gases having temperatures not exceeding 300 °C, from fuel-burning appliances certified for use with Type L vents. The vents may also be used where Type B gas vents are used. They are intended for installation in buildings to provide a passageway for conveying flue gases to the outer air…

1.1 The requirements of this Standard cover the design and construction of Type B (round or oval) and Type BW Gas Vents. 1.2 Type B Gas Vents are intended for the venting of flue gases having temperatures not exceeding 245 °C, from gas fired appliances certified with draft hoods or diverters. Type B Gas Vents are also intended for use with gas fired appliances, without draft hoods or…

This document specifies the design factor, technical requirements, test methods, installation technologies and operation advices applicable to ductile iron pipes, fittings and accessories used in piped irrigation applications. NOTE      In this document, all pressures are relative pressures expressed in bars. This document also specifies materials, dimensions and tolerances, mechanical properties…

This document specifies safety requirements and/or protective measures applicable to EDM equipment and EDM systems intended to be adopted by persons undertaking their design, construction, installation and/or supply, such as: —    manually controlled EDM die sinking or EDM drilling machines; —    numerically controlled EDM die sinking or EDM drilling machines; and —    numerically controlled EDM…

1 Scope 1.1 This Standard specifies performance, design, testing, marking, classification, and other requirements related to anchorage connectors in travel-restraint, fall-arrest, work-positioning, and suspended component/tie-back line systems. 1.2 The requirements of this Standard include (where applicable) anchorage connectors attached to an anchorage. Methods of verifying the actual…

This document establishes general principles for the structuring of systems including structuring of information about systems. Based on these principles, rules and guidance are given for the formulation of unambiguous reference designations for objects in any system. The reference designation identifies objects for the purpose of creation and retrieval of information about an object and, where…