Rechercher

IEC 60079-28:2015 specifies the requirements, testing and marking of equipment emitting optical radiation intended for use in explosive atmospheres. It also covers equipment located outside the explosive atmosphere or protected by a Type of Protection listed in IEC 60079-0, but which generates optical radiation that is intended to enter an explosive atmosphere. It covers Groups I, II and III, and…

IEC 61968-8:2015 specifies the information content of a set of message types that can be used to support many of the business functions related to customer support. Typical uses of the message types include service request, customer agreement, and trouble management. The purpose is to define a standard for the integration of customer support (CS), which would include customer service, trouble…

IEC 62386-201:2015 specifies a bus system for control by digital signals of electronic lighting equipment. This electronic lighting equipment should be in line with the requirements of IEC 61347. This document is applicable to control gear associated with fluorescent lamps. This second edition cancels and replaces the first edition published in 2009 and constitutes a technical revision. The…

IEC 60079-28:2015 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 60079-28:2015 specifies the requirements, testing and marking of equipment emitting optical radiation intended for…

ISO 9241-392:2015 establishes recommendations for reducing the potential visual discomfort and visual fatigue experienced during viewing of stereoscopic images under defined viewing conditions. Visual fatigue and discomfort might be produced by the stereoscopic optical stimulus of disparate images that were presented binocularly. ISO 9241-392:2015 is also applicable to the final products of…

ISO/TR 22100-1:2015 provides assistance to the designer/manufacturer of machinery and related components as to how the system of existing type-A, type-B and type-C machinery safety standards should be applied in order to design a machine to achieve a level of tolerable risk by adequate risk reduction. It explains the general principles of ISO 12100 and how this type-A standard should be used for…

Physical security mechanisms are employed by cryptographic modules where the protection of the modules sensitive security parameters is desired. ISO/IEC TS 30104:2015 addresses how security assurance can be stated for products where the risk of the security environment requires the support of such mechanisms. This Technical Specification addresses the following topics: - a survey of physical…

Physical security mechanisms are employed by cryptographic modules where the protection of the modules sensitive security parameters is desired. ISO/IEC TS 30104:2015 addresses how security assurance can be stated for products where the risk of the security environment requires the support of such mechanisms. This Technical Specification addresses the following topics: - a survey of physical…

IEC 61175-1:2015 provides rules for the composition of designations for the identification of signals and signal connections. This includes the designation of power supply. This part of IEC 61175 is applicable to all types of signals within an industrial system, installation and equipment and industrial products. It deals with the information aspect of signals and not with their physical…

ISO 2144:2015 describes the determination of the residue on ignition of pulps, papers, and boards. The International Standard is applicable to all types of pulp, paper, and board. The lower limit of the determination is about 0,2 %. NOTE The procedure (Clause 7) requires that at least 10 mg of residue is weighed. The limit stated above corresponds to a 5 g sample. If the sample size is…