Electromagnetic Compatibility (EMC) - Part 4-27: Testing and Measurement Techniques - Unbalance, Imm...
This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-4-27:2000 (first edition, 2000-08).
This part of IEC 61000 is a basic EMC (electromagnetic compatibility) publication. It considers immunity tests for electric and/or electronic equipment (apparatus and system) in its electromagnetic environment. Only conducted phenomena are considered, including immunity…
Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Projecto...
This National Standard of Canada is equivalent to International Standard CEI/IEC 60335-2-56: 1997 (second edition, 1997-04).
1 Scope
This clause of part 1 is replaced by:
This standard deals with the safety of electric projectors and similar appliances for household and similar purposes, their rated voltage being not more than 250 V.
NOTE 1 - Examples of appliances that are within the scope…
Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Stationa...
This National Standard of Canada is equivalent to International Standard CEI/IEC 60335-2-51: 1997 (second edition, 1997-02).
1 Scope
This clause of part 1 is replaced by:
This standard deals with the safety of stationary electric circulation pumps intended for use in heating systems or in service water systems, having a rated power input not exceeding300 W, their rated voltage is not…
Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Stationa...
This National Standard of Canada is based on International Standard CEI/IEC 60335-2-6:1997, (fourth edition, 1997-05), including Amendment 1:2000.
1 Scope
This clause of part 1 is replaced by:
This standard deals with the safety of stationary electric cooking ranges, hobs, ovens and similar appliances for household use, their rated voltage being not more than 250 V for single-phase appliances…
Carrier Safety Management System Essentials - Guidelines to Assist in the Implementation of a Carrie...
1. Introduction
CSA Standard B619 (referred to from this point forward as #the standard# or #B619#) was developed to address the unique requirements of the trucking industry. It was designed to provide assurances to stakeholders (such as insurance companies and federal and provincial regulators) that the carrier is committed to complying with all transportation safety requirements. The…
Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Massage ...
This National Standard of Canada is equivalent to International Standard CEI/IEC 335-2-32: 1993 (third edition, 1993-12), with Amendment 1:1999.
1 Scope
This clause of part 1 is replaced by:
This standard deals with the safety of electric massage appliances for household and similar purposes, their rated voltage being not more than 250 V for single phase appliances and 480 V for other…
Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Microwav...
This National Standard of Canada is equivalent to International Standard CEI/IEC 335-2-25: 1996 (fourth edition, 1996-07), including amendment 1:1999.
1 Scope
This clause of part 1 is replaced by:
This standard deals with the safety of microwave ovens for household use, their rated voltage being not more than 250 V.
So far as is practicable, this standard deals with the common…
This Special Publication addresses the current confusion about the relationship
between the ISO 14000 series of voluntary environmental management standards
and regulatory compliance. Many of those involved in the development of the
standards have argued that there is, and should be, no relationship between the
two. However, in the Canadian legal system, such a relationship is inevitable,…
1. Scope
1.1
This Standard applies to motor-operated liquid pump units, for use in nonhazardous, indoor, outdoor (exposed), and submerged locations, and designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I.
1.2
This Standard applies to
(a) pumps for either permanent or cord-connection to the source of supply;
(b) cord- and plug-connected pumps; and
(c)…
Standard for Thermal Insulation, Polystyrene, Boards and Pipe Covering
1. SCOPE
1.1
This Standard specifies the requirements for factory made rigid expanded
polystyrene insulation in the form of pipe covering and boards with or without
facings or coatings made by moulding (EPS) or extrusion (XPS) of expandable
polystyrene beads. This Standard does not apply to laminated products
manufactured with any type of rigid board facer including fibreboard, perlite…