Rechercher

1. Scope 1.1 This Standard applies to those structures and components in CANDU nuclear power plants which require seismic qualification by analytical methods (see CSA Standard CAN3-N289.1, General Requirements for Seismic Qualification of CANDU Nuclear Power Plants). ,, 1.2 This Standard specifies the requirements, criteria, and methods for: (a) Determining the DBE or SDE ground…

A specimen is subjected to a steadily increasing pressure of water on one face, under standard conditions, until penetration occurs in three places. The water pressure may be applied from below or from above the test specimen. The hydrostatic head supported by a fabric is a measure of the resistance to the passage of water through the fabric.

Gives general instructions ans also specifies the methods to be used for the determination of density at 20 C, the determination of aldehydes and ketones content, the determination of destillation yield, the determination of dry residue after evaporation on the water bath, the determination of bromine number, the measurement of colour and the determination of water content. International…

The principle consists in titration of the acidity of a test portion with a standard volumetric sodium hydroxide solution, using phenolphthalein as indicator. This document should be read in conjunction with ISO 755/1. International Standards ISO 755/1, ISO755/2 and ISO 755/3 cancel and replace ISO Recommendation R 755-1968, og which they constitute a technical revision. It as also been approved…

1. Scope 1.1 This Standard applies to electrically operated commercial dishwashing machines and commercial glass washing machines for connection to supply voltages of 600 V or less, intended to be used in accordance with the Rules of the Canadian Electrical Code, Part I. For convenience only, the short term dishwashers is used herein. 1.2 This Standard applies to both cord-…

1. Scope 1.1 This Standard applies to electric luminaires for indoor, outdoor, and underground use in hazardous locations, intended for permanent installation on branch circuits of not more than 600 V between conductors and involving lamp voltages of not more than 7500 V in accordance with the Rules of the Canadian Electrical Code, Parts I and V. 1.2 This Standard includes requirements for…

1. Scope 1.1 This standard applies to a dispatch case of hard molded plastic with metal frame, scuff-resistant exterior and washable interior suitable for carrying files and papers up to legal-size documents. 1.2 This standard is primarily intended to serve the requirements of the federal government.

Specifies the chemical and mechanical properties, methods of manufacture, acceptance conditions and marking. Applies to plates hot-rolled on reversing mills having a thickness of 3 mm and over, wide flats, bars, beams, sections and hollow sections. Does not deal with steels for which other Internationale Standards exist. The position and orientation of samples are given in the annex.

This provisional standard applies to nailed wooden boxes. It states their required material, construction, assembly, marking and performance for acceptability in the transport of dangerous goods.

This provisional standard applies to inside paper bags and linings (TC-2D, TC-2J, TC-2K, TC-2L, TC-2M). It states their required materials, construction and performance for acceptability in the transport of dangerous goods.