Metallic and other non-organic coatings — Review of methods of measurement of thickness
This second edition cancels and replaces the first edition (i. e. ISO 3882:1978). Applies to both metallic and non-metallic substrates. It is limited to tests already specified, or to be specified, in International Standards, and excludes certain tests which are employed for special applications. Includes five non-destructive methods and four destructive methods.
Method for the Measurement of Vinyl Chloride in Air
1. Scope
1.1 This Standard applies to the measurement of vinyl chloride in air, using grab samples or integrated samples, usually collected by continuous adsorption in a sorbent tube over a period of time.
1.2 This Standard employs gas chromatography for the measurement of concentrations of vinyl chloride in air between 0.01 mg·m-3 and 2600 mg·m-3 at 25°C and 101.3 kPa.
1.3 Grab…
1. Scope
1.1 This Standard applies to mineral-insulated cables with copper, nickel-clad copper, or nickel conductors, enclosed in a copper or stainless steel sheath.
1.2 The constructions covered by this Standard are intended for use in power, instrumentation, control, and fire alarm systems in accordance with the Rules of the Canadian Electrical Code, Part I.
1.3 The…
1. Scope
1.1 This Standard applies to laboratory equipment intended to be connected to supply circuits with nominal system voltages of 750 V and less, for use indoors in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I.
1.2 This Standard applies to equipment in which protection from electrical shock due to failure of functional insulation is…
Water Treatment Equipment and Water Quality Requirements for Hemodialysis
Applies to:
(a) water for the preparation of dialysing fluid and concentrate
for hemodialysis;
(b) all water intended for contact with the dialysing fluid
pathway;
(c) baseline quality of the feed water and any other input water;
(d) water treatment and monitoring equipment; and
(e) water distribution system.
Users of this Standard are invited to consult the other standards
in the Z364…
1. Scope
1.1 This standard applies to one grade of general purpose lubricating
grease consisting essentially of mineral oil, a suitable gelling agent
and necessary additives.
1.2 Intended Uses - This grease is intended for the general lubrication of
antifriction bearings, plain bearings, gears, and sliding and rolling
surfaces of naval machinery…
1. Scope
1.1
This Standard prescribes guidelines for design, evaluation, and test of
electronic safety functions, and is intended to provide guidance to the
Subcommittees of the Standards Steering Committee on the Canadien Electrical
Code, Part II.
1.2
This Standard applies to individual electronic components, assemblies, or
systems including software and firmware that perform a…
1. Scope
1.1 This Standard applies to a Type FCC under-carpet wiring system utilizing cable that is installed under carpet squares that are removable, and associated accessories, intended for use in accordance with the Rules of the Canadian Electrical Code, Part I.
Applies to polyethylene pipe, tubing and fittings for use in gas
mains and services including gathering, transmission, and
distribution application, which carry fuel gases containing not
more than 1% of aromatic hydrocarbons. It also applies to all
types of fittings and connections used in a 'plastic' gas pipe
system including plastic-to-metal transition fittings, plastic
fittings…
1. Scope
1.1 This Standard applies to kerosine-fuelled appliances with capacities up to 4400 W that are primarily used as portable space heating appliances.
1.2 Appliances with input capacities greater than 4400 W may be examined and tested in accordance with these requirements and with any additional requirements deemed necessary by the regulatory authority.
1.3 This Standard…
