Rechercher

Establishes a system for sealing the port connection of couplings. Specifies dimensions to achieve interchangeability of the port connection, the fitting end and a seal. The seal may be a standard O-ring or a special ring.

Specifies a test method for determining, under standard conditions, whether a single-coat film or a multi-coat system of paints after a specified drying period is sufficiently dry to resist damage when two painted surfaces or one painted surface and another surface are placed in contact under pressure. For any particular application, it needs to be completed by supplementary information.

This standard applies to the design and construction requirements of uniform dress shirts in polyester/cotton fabric. It specifies two types (par. 3.1), each providing the base on which a complete shirt may be composed by inclusion of any of the features listed in par. 5.2.2.

This standard specifies physical and chemical requirements for a solvent-type paste wax for application on linoleum, vinyl or wooden floors. It is not suitable for use on asphalt or rubber floors.

1.1 This standard states physical and chemical requirements for a built sodium soap in powder form, suitable for commercial and institutional laundering. 1.2 The soap is intended for use in soft water (calcium cabonate hardness up to 120 mg/L). In locations where water hardness exceeds 120 mg/L (as calcium carbonate), an appropriate synthetic detergent composition would be more…

1.1 This standard states physical, chemical and performance requirements for a special purpose non-ammoniated liquid detergent compound for use in the removal of water-emulsion floor polish and wax. 1.2 For more detailed information on intended uses, see par. 7.2.

This standard applies to a diethyltoluamide type insect repellent, intended for direct application to exposed skin surfaces and, under certain conditions, to clothing. It is intended for protection against mosquitoes, black flies, sand flies, gnats, ticks and chiggers (mites).

This standard applies to methyl ethyl ketone for use as a solvent for paints, strippable coatings, adhesives and for removal of petroleum type preservatives.

This standard applies to acetone for use as a solvent in paints, lacquers, and adhesives as well as general solvent uses.

This standard applies to black graphite pencil leads for use in mechanical pencils for drawing and sketching on tracing paper.