Rechercher

1. Scope 1.1 This Standard provides the definition of the term park model trailer as used in the CAN/CSA-Z241 Series, Park Model Trailers. It also gives general safety requirements that apply to the other Standards in the CAN/CSA-Z241 Series.

1. Scope 1.1 Requirement Specification This Standard specifies vehicular requirements for park model trailers including minimum requirements for the coupling and tongue or A-frame as well as for the running gear of the trailer. 1.2 Standard Application This Standard applies to park model trailers equipped with limited-use running gear.

1. Scope 1.1 General This Standard outlines the minimum requirements for materials, products, equipment, and workmanship needed to ensure that park model trailers will provide adequate (a) structural strength and rigidty; (b) protection against corrosion, decay, insects, and other similar destructive forces; (c) protection against the hazards of fire; (d) resistance to the elements…

1. Scope 1.1 General This Standard sets the minimum installation requirements and material standards for a plumbing system in a park model trailer. 1.2 Disclaimer This Standard is not intended as a design specification or an instruction manual for untrained persons.

1. Scope 1.1 This Standard applies to the factory installation of propane appliances and equipment in park model trailers. Note: CGA Standard CAN1-B149.2 was used as a basis for the preparation of this Standard and should be consulted for installations not covered here.

1. Scope 1.1 General This Standard applies to the electrical requirements for park model trailers that are intended to be connected by a cord and attachment plug to a source of electrical supply not exceeding 250 V between conductors or 150 V to ground and 50 A maximum in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 Nonapplicable Types This Standard does…

This National Standard of Canada is equivalent to International Standard ISO 6683-1981. This International Standard establishes the minimum performance requirements for seat belts and the fastening elements of seat belts necessary to restrain an operator or rider within a roll-over protective structure (ROPS) in the event of a machine roll-over as defined in ISO 3471. NOTE - Dynamic seat…

1. Scope Z241.0 1.1 This Standard provides the definition of the term park model trailer as used in the CAN/CSA-Z241 Series, Park Model Trailers. It also gives general safety requirements that apply to the other Standards in the CAN/CSA-Z241 Series. Z241.1 1.1 Requirement Specification This Standard specifies vehicular requirements for park model trailers including minimum…

1.1 This Standard describes zinc-coated steel wire strand suitable for use as guys, suspension strand, span wires, and overhead ground wire strand. Overhead ground wire strand for electric power transmission is produced free of wire joints. Included are requirements for Grades 110, 160, 180, and 220 [800, 1100, 1300 and 1500]. Zinc-coatings for all grades include hot-dip Class A and electro-…

1.1 This standard applies to one type of distillate fuel which is suitable for use in medium speed diesel engines of the type generally used in railroad locomotives. 1.2 This type of fuel may be suitable for use in other medium speed diesel engine applications.