Rechercher

This International Standard specifies an instrumental (automatic analyser) method for the determination of total nitrogen in rubber and rubber additives.

This International Standard specifies a rapid method using nuclear magnetic resonance (NMR) for the determination of the oil and water contents of oilseed residues obtained after oil extraction by pressure or solvents (excluding mixed products). It is applicable to oilseed residues as flour, plates or agglomerates, provided that the particles are smaller than 2 mm and that the water content is…

This International Standard specifies a hydroxide precipitation and EDTA titrimetric method for the determination of the zinc content of zinc ores and concentrates containing 10 % (m/m) to 60%(m/m) zinc.

This International Standard specifies a non-dispersive infrared spectrometry method for the continuous analysis and recording of the carbon monoxide (CO) content of the ambient air. The method is applicable to the determination of carbon monoxide concentrations from 0,6 mg/m3 (0,5 ppm volume fraction) to 115 mg/m3 (100 ppm volume fraction). The method has a lower limit of detection of about 0,06…

This International Standard specifies methods for the determination of puncture-impact properties of rigid plastics in the form of flat test specimens, such as discs or square pieces, under defined conditions. Specimens may be moulded directly, cut from sheets or taken from finished products. Different types of test specimens and test conditions are defined. These falling-dart methods are used to…

This International Standard specifies three methods for carrying out a stacking test on a complete, filled transport package, or on a unit load, using a static load. Whichever method is employed, the test may be used to assess the performance of a package or a unit load, in terms of its strength or the protection that it offers to its contents when it is subjected to stacking. It may be performed…

This International Standard specifies two methods for carrying out a sinusoidal vibration test on a complete, filled transport package or unit load using a variable frequency. These tests may be used to assess the performance of a package or an unit load in terms of its strength or the protection that it offers to its contents when it is subjected to vertical vibration. Each may be performed…

This International Standard specifies a lead sulfate precipitation EDTA titrimetric method after acid decomposition for determination of the lead content of lead sulfide concentrates. The method is applicable to lead sulfide concentrates having lead content in the range 50 % (m/m) to 80%(m/m). The method is not applicable to lead concentrates containing more than 1 % (m/m) of barium.

This National Standard of Canada is equivalent to International Standard ISO/IEC 13522-1:1997 (first edition, 1997-05-15). 1 Scope This part of ISO/IEC 13522 specifies the coded representation of final-form multimedia and hypermedia information objects that are interchanged as units within or across services and applications, by any means of interchange (e.g. storage, local area network…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 12064-1:1995. 1 Scope This part of ISO/IEC ISP 12064 specifies an interchange format suitable for transfer of structured documents between equipment designed for raster processing. The documents supported by this part of ISO/IEC ISP 12064 are based on a paradigm of an electronic engineering drawing or…