Rechercher

Field devices are a key component in intelligent transport systems (ITS). Field devices include traffic signals, message signs, weather stations, traffic sensors, roadside equipment for connected ITS environments, etc. The ISO 26048 series defines data that can be used to manage field devices, including device configuration, control, and monitoring. Field devices can be quite complex,…

This document specifies an analytical method for the determination of silver on a material considered homogeneous. The silver content of the samples lies preferably between 50 ‰ (parts per thousand) and 990 ‰ (parts per thousand). Fineness above 999,0 ‰ can be determined using a spectroscopy method by difference (e.g. ISO 15096). NOTE Lower contents of silver can be analyzed with this method.

ISO 1825:2017 specifies the dimensions and construction of, and requirements for, four types of hose and hose assembly for use in all operations associated with the ground fuelling and defuelling of aircraft. All four types are designed for: a) use with petroleum fuels having an aromatic-hydrocarbon content not exceeding 30 % by volume; b) operation within the temperature range of −30 °C to +65 °…

This Document specifies a method for the determination of total moisture content of solid recovered fuels (SRF) by drying a sample in an oven. This method is suitable for use for routine production control on site, e.g. if a high precision of the determination of moisture content is not required. It is applicable to all solid recovered materials including solid recovered fuels. NOTE 1 The total…

ISO 11126-10:2017 specifies requirements for almandite garnet abrasives, as supplied for blast-cleaning. It specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides. The requirements specified in ISO 11126-10:2017 apply to abrasives supplied in the "new" condition only. They do not…

This document specifies requirements for the machine manufacturer for preparation of the safety-relevant parts of an instruction handbook for machinery. This document: — provides further specifications to the general requirements on information for use given in ISO 12100:2010, 6.4.5; and — deals with the safety-related content, the corresponding structure and presentation of the instruction…

ISO 4967:2013 specifies a micrographic method of determining the non-metallic inclusions in rolled or forged steel products having a reduction ratio of at least 3 using standard diagrams. This method is widely used to assess the suitability of a steel for a given use. However, since it is difficult to achieve reproducible results owing to the influence of the test operator, even with a large…

This document specifies omnidirectional/360-degree image and motion contents using Rec. ITU-T T.81 | ISO/IEC 10918‑1, Rec. ITU-T T.800 (11/2015) | ISO/IEC 15444‑1, and ISO/IEC 18477-3.

The document specifies all common test cases to be applied to and correctly handled by EVs (EVCC) and EVSEs (SECC) implementing ISO 15118-20 that are independent of a particular charging type (AC, DC, ACD, WPT charging). The document considers the use cases defined in ISO 15118-1:2019 The test system will comprise: - A simulated SECC to verify the correct behaviour of a real EVCC - A simulated…

ISO 19828:2017 specifies the requirements for visual inspection of welds in metallic materials and requirements for qualification and certification of personnel for visual weld inspection. ISO 19828:2017 is also applicable to the visual inspection of the joint prior to or between welding sequences, and of brazed joints. In this case, the contents of theoretical and practical training will need to…