Rechercher

This National Standard of Canada is equivalent to International Standard ISO 10014:2006. 1 Scope This International Standard provides guidelines for realizing financial and economic benefits from the application of the ISO 9000 quality management principles. NOTE These are herein referred to as "management principles". This International Standard is directed to top…

1 Scope 1.1 This Standard applies to corrugated electrical nonmetallic tubing (ENT) and mechanically-attached fittings, for use in accordance with C22.1, Canadian Electrical Code, Part I (CEC), and NFPA 70, National Electrical Code (NEC). These requirements also apply to mechanically-attached fittings integral with an outlet box. 1.2 Products covered by this Standard are intended for use…

This National Standard of Canada is based on International Standard IEC 61131-2:2003. 1 General 1.1 Scope and object This Part of IEC 61131 specifies requirements and related tests for programmable controllers (PLC) and their associated peripherals (for example, programming and debugging tools (PADTs), human-machine interfaces (HMIs), etc.) which have as their intended use the control…

This National Standard of Canada is based on International Standard CEI/IEC 60826:2003. 1 Scope This International Standard specifies the loading and strength requirements of overhead lines derived from reliability based design principles. These requirements apply to lines 45 kV and above, but can also be applied to lines with a lower nominal voltage. This standard also provides a…

This National Standard of Canada is based on International Standard ISO 22857, first edition, 2004-04-01. 1 Scope This International Standard provides guidance on data protection requirements to facilitate the transfer of personal health data across national borders. It does not require the harmonisation of existing national standards, legislation or regulations. It is normative only in…

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-29:2003. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric battery chargers for household and similar use having an output at safety extra-low voltage, their rated voltage being not more than 250 V. Battery chargers not intended…

This National Standard of Canada is based on International Standard CEI/IEC 62155:2003. 1 Scope and object 1.1 General This standard is applicable to - ceramic and glass hollow insulators intended for general use in electrical equipment; - ceramic hollow insulators intended for use with a permanent gas pressure in switchgear and controlgear. These insulators are intended for indoor…

This National Standard of Canada is equivalent to International Standard ISO 19901-1:2005. 1 Scope This part of ISO 19901 gives general requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures of all types used in the petroleum and natural gas industries. The requirements are divided…

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-71:2005. 1 Scope This clause of Part 1 is replaced by the following. This standard deals with the safety of all kinds of electrical heating appliances used for livestock rearing and breeding, such as: heat-radiating appliances, electrical sitting-hens, incubators, chicken breeding units and heating plates…

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-70:2004. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of milking machines, to be used in stalls and in the open, that are designed for milking farm animals, such as cows, the rated voltage of the milking machine being not more than 250 V for…