Rechercher

1.1 Scope 1.1.1 This Standard applies to the mechanical and electrical features of newly manufactured dispensing devices for propane liq uid for use as fuel in internal combustion engines where such devices are intended primarily to dispense the liquid directly into the fuel storage tank of the vehicle. 1.1.2 This standard contains SI (Metric) equivalents to the yard/pound quantities…

1. SCOPE 1.1 This Standard contains requirements for non-threaded, quick-connect couplings of the internal lug design for use in fire protection service. (See Appendix A.) 1.2 The couplings are intended for use with fire hose in the following standard sizes: 38 mm, 65 mm, 100 mm, 125 mm and 150 mm. 1.3 This Standard also contains requirements for the non-threaded, quick-connect portion of…

The method is applicable to antimony contents between 0.001 and 0.1 % (m/m) in all types of copper and copper alloys listed in International Standards. The range of application may be extended by appropriate modification of the mass of the test portion, the extraction volume and the cell path length. Specific proposals to cover lower and higher concentrations are in preparation. ISO 5956…

The method is applicable to bismuth contents between 0,00005 and 0,02 % (m/m) in all types of copper and copper alloys listed in International Standards. Specifies principle, reagents, apparatus, procedure, expression of results and test report.

The method is applicable to contents of iron in all types of copper alloys listed in International Standards. ISO 4748 specifies principle, reagents, apparatus, procedure, expression of results and test report.

The method is applicable to contents of sulfur greater than 0,010 % (m/m) in all types of copper and copper alloys listed in International Standards. Specifies principle, reagents, apparatus, procedure, expression of results and test report. Figure 1 demonstrates the apparatus for the determiantion of sulfur by combustion, figures 2 and 3 illustrate some details.

This International Standard specifies the position of the emulsion, the frame rate of exposure, and the orientation of the area being exposed for 8 mm Type S motion-picture film cameras.

It has the status of a horizontal standard in accordance with IEC Guide 108.

1. Scope 1.1 This standard describes the formats, rules, and procedures for the encoding of alphanumeric text and pictorial information for videotex and teletext¹ applications. (¹The term teletext (not yet adopted by CCIR) is commonly used to refer to a broadcast television videotex service. It is different from teletex, a term officially adopted by CCITT to define a specific type of…

This International Standard specifies the emulsion orientation, the rate of projection and the Position of the image area for 8 mm Type S motion-picture film as used for direct front projection.