Rechercher

L'ISO 19429:2015 fournit un système de désignation de l'emplacement d'implantation d'un corps d'implant dans une mâchoire; elle est destinée à être utilisée avec le système décrit dans l'ISO 3950. Elle n'indique pas si le dispositif est visible dans la cavité buccale ou si des éléments transmuqueux ou des restaurations d'implants sont présents. Comme le…

ISO 18871:2015 provides methodology for measuring coalbed methane content of coal core samples obtained by coring or sidewall coring during well drilling. It shall be also applied to drill cuttings samples, if the equipment for the determination of the coalbed methane content according to a respective national standard is not available. The selection of the most appropriate method shall consider…

ISO 6892-4:2015 specifies the method of tensile testing of metallic materials in liquid helium (the boiling point is ?269 °C or 4,2 K, designated as 4 K) and defines the mechanical properties that can be determined. This part of ISO 6892 may apply also to tensile testing at cryogenic temperatures (less than ?196 °C or 77 K), which requires special apparatus, smaller test pieces, and concern for…

ISO 16908:2015 specifies the characteristics of rubber floor tile/planks. ISO 16908:2015 includes a classification system based on intensity of use, which shows where resilient floor coverings should provide satisfactory service. ISO 16908:2015 specifies rubber floor tile/planks for applications involving the use of normal footwear and does not cover applications where special footwear, such as…

La présente Norme internationale spécifie les caractéristiques principales des courroies synchrones sans fin et des poulies synchrones utilisées dans les transmissions synchrones par courroies sans fin[1] pour la transmission mécanique de puissance et lorsqu'une indexation ou synchronisation positive est nécessaire. Les caractéristiques principales comprennent: a) les dimensions nominales…

ISO 16540:2015 fournit des lignes directrices concernant l'utilisation d'essais de flexion quatre points pour évaluer la résistance des métaux, y compris l'acier au carbone, les aciers faiblement alliés et les aciers résistant à la corrosion (ARC), à la fissuration par corrosion sous contrainte. La méthode donne des indications pour les essais de la tôle-mère et des soudures et…

ISO 16540:2015 provides guidelines for the use of four-point bend testing to evaluate the resistance of metals including carbon steel, low alloy steels, and corrosion resistant alloys (CRAs) to stress corrosion cracking. The method gives guidance on testing of both parent plate and welds and includes procedures for metals that have no distinct yield point in their stress-strain behaviour as well…

ISO 9599:2015 specifies a gravimetric loss-in-mass method for the determination of the hygroscopic moisture content in analysis samples of copper, lead, zinc, and nickel sulfide concentrates. The method is applicable to copper, lead, zinc, and nickel sulfide concentrates free from volatile organic flotation reagents, for example kerosene, and with hygroscopic moisture contents between 0,05 % (m/m…

ISO 19429:2015 provides a system for designating the location of an implant body within a jaw, and is intended for use with the scheme described in ISO 3950. It does not in itself indicate whether the device is visible within the oral cavity or the presence of transmucosal components or implant restorations. Since the system describes location but not restoration form, it is not necessary to use…

ISO 5074:2015 specifies the method for determining the grindability index of hard coal using the Hardgrove machine. It also specifies the procedure for calibrating the test machine and for preparing the standard reference coal samples. NOTE In this International Standard, the term "hard coal" is used as an indication of maturity or rank in the coalification sequence and is not…