1. Scope
1.1 This Standard applies to dry type, air-cooled transformers, autotransformers (fixed and variable), and primary-circuit reactors intended for use in, on, or associated with other approved equipment in capacities of 1000 kV·A and less and for primary voltages of 750 V or less, 60 Hz and less, and intended for use in nonhazardous locations in accordance with the Canadian…
1. Scope
1.1
This Standard applies to ac and dc motors with inherent overheating protection
designed to be used in accordance with the Rules of the Canadian Electrical
Code, Part I, as follows:
(a) motors with a voltage rating not exceeding 600 V and with a protective
device connected in the motor circuits;
(b) impedance protected motors with a voltage rating not exceeding 600 V; and
(c…
1. Scope
1.1
This Standard applies to insulated conductors intended for internal wiring in
electrical equipment, but not as circuit conductors for use in raceways except
where permitted by the Canadian Electrical Code, Part I.
1.2*
Constructions covered by this Standard are
(a) single-conductor, thermoplastic-insulated (Clause 5):
(i) Type TXF, 60
Asbestos-cement sheets - Control and testing methods
1.1
This standard covers the inspection and test methods for the verification of
dimensional, mechanical and physical properties of flat, corrugated, grooved or
fluted asbestos-cement sheets, as well as those of shingles, bulkheading,
molded roofing sheets and pavements tiles.
1.2
This standard includes the following control and testing methods :
a) control of geometric…
Shunt power capacitors of the self-healing type for a.c systems having a rated voltage up to and inc...
Applies to self-healing capacitor units and banks intended to be used, in particular, for power-factor correction of a.c. power systems of up to and including 660 V rated voltage and frequency 15 Hz to 60 Hz.