Rechercher

This part of ISO/IEC 14776 defines the mechanical, electrical, timing, and protocol requirements of the SCSI parallel interface to allow conforming SCSI devices to inter-operate. The SCSI parallel interface is a local I/O bus...

This part of ISO 12614 specifies tests and requirements for the fittings, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. This part of ISO 12614 is not...

Scope 1.1 This standard applies to metallic (copper, steel and stainless steel) press-connect type fittings, and valves (hereafter referred to as fittings unless otherwise specified) for use with fuel gas systems intended for...

Fire resilient community planning, building design and materials for northern regions including guidance on incorporating climate change adaptation strategies, alignment with existing strategies, procedures for infrastructure...

1.1 This Standard covers cord connected, direct plug-in and receptacle type SPDs whose primary function is to provide surge protection and that are intended to be marked SPD Type 3 in accordance with Clause 5.2 a). This...

ISO/IEC 14776 (all parts) provides for many different types of SCSI devices (e.g., disks, tapes, media changers). This standard defines a device model that is applicable to all SCSI devices. Other command standards expand on...

Note: Standard Title and Scope updated November 27, 2018 as per a request from the responsible SDO. (NOI originally published to CNS on May 29, 2018). This Standard covers commercial and industrial plant oil extraction...

This part of ISO/IEC 14776 defines the command set extensions to facilitate operation of SCSI stream devices. This Standard in conjunction with ANSI INCITS 351-2001 fully specifies the standard command set for the SCSI stream...

Ce document vise à établir un ensemble de blocs de construction SLA cloud communs (concepts, termes, définitions, contextes) pouvant être utilisés pour créer des accords de niveau de service (SLA) cloud. Ce document précise a...

Note: Le champ de cet avis d’intention (publié pour la première fois le 15 mars 2022) a été mis à jour par l’OEN responsable le 21 avril 2022. This document specifies tests and requirements for the fittings, a liquefied...

La présente norme spécifie les caractéristiques et les méthodes d’essai relatives aux tuyaux à paroi pleine et aux raccords fabriqués à partir d’un polyéthylène haute densité (PE-HD) d’une tension caractéristique égale ou...