Rechercher

This International Standard lays down the dimensions and specifies requirements for the design of sprockets used with 8 mm Type S motion-picture raw stock or processed film.

Is based on Standard No.106 of the International Assotiation for Cereal Science and Technology (ICC). The method consists inpreparing of dough from a sample of flour and a buffered solution of sodium chloride, isolating of the wet gluten by washing this dough with a buffered solution of sodium chloride ( washing out by hand or mechanical washing out ), followed by removing of exess washing…

This standard is one of the CAN3-O188 Series of Standards on Particleboard and Waferboard. It describes the test procedures for determining dimensional tolerances, density and moisture content, static bending strength, internal bond strength, hardness, screw-holding strength, linear expansion and nail withdrawal resistance of particleboard and waferboard. Additionally this standard…

It has the status of a horizontal standard in accordance with IEC Guide 108.

Specifies mandatory and optional markings of general purpose valves and states the manner of applying the markings, i.e. on the body, on a flange, or on a identification plate. Markings on the body may be integral with the body or on a plate securely fixed to the body. The table lists those items which may be included in international standards for individual types of valves.

This International Standard gives guidance to both manufacturers and users of machine tools on the information that should be provided and followed regarding the lubrication instructions.

The aim is to give examples for the guarding of nip points between the chains and the sprocket wheels or caterpillar drives for all conveyors and elevators using chains as transporting elements. Describes different safety devices. Supplements the various International Standards dealing with safety of continuous mechanical handling equipment.

Uniform requirements regarding performance testing, guide for co-ordination of fuse and disconnector protection and test procedures for the disconnecting test on internal fuses. Note:- This standard applies to internal fuses to protect shunt capacitors and to internal overpressure disconnectors used to protect self-healing metallized dielectric capacitors.

The International System of Units (SI) is the source document for the SI in Canada. It is essentially a practical system of units and is both coherent and decimal. This standard provides definitions for the internationally agreed base units together with their symbols; prefixes and their symbols; rules for their manipulation; and extracted historical decisions of the General Conference…

Defines a method for deriving minimum elevated temperature lower yield or proof stress values for inclusion in International Standards. Defines further a verification procedure which may be used by a manufacturer as an alternative to hot-testing for satisfying the purchaser that his product meets the specified minimum elevated temperature proof stress values.