Rechercher

ISO 18542 is structured in two parts: Part 1 defines a framework and a process for agreeing terms; Part 2 defines the process implementation requirements for a terminology management system and for a Registration Authority with a digital annex. The basic purpose of ISO 18542 is to facilitate searching of vehicle manufacturer (VM) repair and maintenance information (RMI) websites by independent…

ISO 14229-3:2012 specifies the implementation of a common set of unified diagnostic services (UDS) on controller area networks (CAN) in road vehicles (UDSonCAN). It references ISO 14229-1 and ISO 14229-2 and specifies implementation requirements of the diagnostic services to be used for diagnostic communication over CAN. It does not specify any requirement for the in-vehicle CAN bus architecture.

ISO 14687-2:2012 specifies the quality characteristics of hydrogen fuel in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems.

ISO 14229-4:2012 specifies the implementation of a common set of unified diagnostic services (UDS) on FlexRay networks (FR) in road vehicles (UDSonFR). UDSonFR references ISO 14229-1 and ISO 14229-2 and specifies implementation requirements of the diagnostic services to be used for diagnostic communication over FlexRay. UDSonFR does not specify any requirements of the in-vehicle FlexRay…

ISO/IEC PAS 16898:2012 specifies a designation system as well as the shapes and dimensions for secondary lithium-ion cells for integration into battery packs and systems used in electrically propelled road vehicles including the position of the terminals and any over-pressure safety device (OPSD). It is related to cylindrical, prismatic and pouch cells. The cell designation according to ISO/IEC…

ISO 22241-5:2012 applies to diesel engine powered road vehicles using selective catalytic reduction (SCR) technology. It is primarily intended for use by passenger cars and light commercial vehicles including buses with a gross vehicle mass of not more than 3.5 t, but may also be used by vehicles with a gross vehicle mass of over 3,5 t. ISO 22241-5:2012 specifies the refilling interface for the…

ISO/IEC PAS 16898:2012 specifies a designation system as well as the shapes and dimensions for secondary lithium-ion cells for integration into battery packs and systems used in electrically propelled road vehicles including the position of the terminals and any over-pressure safety device (OPSD). It is related to cylindrical, prismatic and pouch cells. The cell designation according to ISO/…

ISO 22900-3:2012 focuses on the description of an object-oriented programming interface. The objective is the ability to implement server applications, used during the design, production and maintenance phase of a vehicle communication system, compatible to each other and thus exchangeable. From a user's perspective, access and integration of on-board control units is provided by a…

ISO 7641:2012 gives a simplified procedure for the calculation of the mechanical strength of steel drawbars, whether there are welds or not, for centre-axle trailers Categories O1 and O2 as specified in the UNECE, Consolidated Resolution on the Construction of Vehicles (R.E.3). Consequently, it only applies to simple constructions that enable a calculation in bending.

ISO/TR 12204:2012 provides general, informative guidance for the integration of safety critical and time critical warning signals (signals which, if ignored even briefly, could result in bodily harm to the occupant(s) of the vehicle and/or to other road users) into existing in-vehicle messages presented to a driver. Integration of non-critical signals are outside the scope of ISO/TR 12204:2012,…