Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testi...
Device specified is known as Goodrich flexometer, but any other apparatus giving equivalent performance may be used. Predictions regarding the durability of rubbers in finished articles are possible by means of test results for the properties mentioned. Method not recommended for rubber having a hardness greater than 85 IRHD. - Part 1 of this International Standard: basic principles, part 2:…
Chlorofluorohydrocarbons for industrial use — Analysis by gas chromatography — General principles
Establishes a standard layout for methods for the determination of volatile components and gives general information on these methods. Takes into account the general layout of methods of chemical analysis given in ISO 78/2 and the recommendations given in ISO 2718.
Rubber footwear — Lined or unlined rubber industrial boots with chemical resistance
Specifies requirements for the footwear mentioned for use in chemical industry and in industrial plants and resistant to chemicals specified in this standard (sulphuric acid, hydrochloric acid and sodium hydroxide). In the case of chemicals other than those specified, the advice of the footwear manufacturer should be sought. It is recommended that footwear used in contact with chemicals should be…
Cinematography — Spool, daylight loading type, for 35 mm motion-picture cameras (capacity 30 m - 100...
This international Standard specifies the dimensions and characteristics of the general purpose daylight loading spool with a nominal capacity of 30 m (100 ft) for use in 35 mm motion-picture cameras.
NOTE - The dimensions specified in this International Standard are in substantial agreement with corresponding dimensions for microfilm Camera spools described in ISO 1116 (sec the annex).
Coating, Polyurethane, Two-Package, General Purpose
1. Scope
1.1 This standard applies to a two-package polyurethane coating for
interior and exterior use on metal, wood, glass-fiber-reinforced
plastic and concrete where excellent resistance to abrasion, impact,
water and corrosion are desired and where some yellowing and chalking
are not abjectable.
1.2 For more detailed information on uses,…
Tolerances and Standard Fits for Mating Parts, Metric Sizes
1. Scope
1.1 This Standard provides definitions of terms, tables of preferred basic sizes and standard tolerances, a series of standard fits to cover most engineering requirements, and information for the design of special fits for use where standard fits are unsuitable.
1.2 It is not the intention of this Standard to specify fits and tolerances for specific applications, but to afford a…
Activated Carbon for Odor Removal from Ventilating Systems
Applies to activated carbon material for use in air filters
intended for the removal of odors from air streams in heating,
air-conditioning and ventilating systems. This standard
identifies the physical characteristics and performance
requirements of new or reactivated carbon used in carbon air
filter units as component parts of heating, air conditioning and
ventilating systems.
1. Scope
1.1 These requirements cover prefabricated inserts for masonry fireplaces.
These appliances are designed for burning solid fuels such as wood and coal.
1.2 This Standard covers catalytic combustors utilized with inserts.
1.3 Any appliance which is designed to vent through the throat of the masonry
fireplace shall be considered as being within the scope of this Standard…
Long-term leach testing of solidified radioactive waste forms
Provided to measure the resistance to leaching of the solidified materials: glass, glass-ceramics, ceramics, bitumen, cement, concrete, plastics, the test being aimed at the comparison of different kinds or compositions, intercomparison between test results from different laboratories on one product or on products of different processes. It is not required to carry out tests in all possible…
