Methods of test for winding wires. Part 1: General.
Gives methods for calculating the cyclic rating factor for cables
where the internal thermal capacitance can be neglected.
The simplified methods in this standard require only a knowledge of
the full shape of the load variation for not more than 6h
immediately preceding the time of maximum temperature and an
average value for times before that.
Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mou...
Specifies a conventional system for identifying cylinder dimensions and mounting dimensions thereof. Such a system will be composed of: a letter code for identifying mounting dimensions, envelope dimensions, cylinder fitting dimensions; a code for identifying cylinder mounting types. Although presents a code and a method of dimensioning (illustrated by 56 figures), it is not intended that all…
Rubber- or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances
Specifies classes of dimensional tolerances and test methods for the measurement of dimensions. Defines covered rollers as cylindrical cores, generally of metal, with a cover of rubber or plastics for particular use. They are manufactured in a wide variety of sizes and hardness grades depending on the intended use. - Part 1 and 2 of this standard deal with the requirements for hardness, and the…
Wheat flour and rye flour — General guidance on the drafting of bread-making tests
The guidance follows the standard layout widely used for methods of analysis and thus ensures that no element id left unconsidered by the user when elaborating or drafting a bread-making test. It provides information on the contents of the clauses, such as scope and field of application, principle, ingredients, apparatus, sampling, procedure, expression of results, test report.
Reinforced plastics based on unsaturated polyester resins — Determination of residual styrene monome...
The residual styrene monomer content in reinforced plastics based on unsaturated polyester (UP) resins is an important criterion in evaluating the degree of cure of UP resins in the polymerized state. The determination is carried out by extraction of the residual monomer styrene from the UP resin in the polymerized state using dichloromethane and subsequent gaschromatographic analysis of the…
Qualification Requirements for Agencies Testing Non-flammable Medical Gas
Piping Systems
Applies to testing agencies that are engaged in the testing of
piping systems for nonflammable medical gases to determine their
conformity to Part III of Standard Z305.1
Packing for Transportation of Dangerous Goods in Prescribed Packagings
1. Scope
1.1 This standard sets out the requirements for packing for transport of
dangerous goods in prescribed packagings, other than dangerous goods
classed as explosives (Class 1), gases (Class 2), infectious (Division
6.2) or radioactive (Class 7). This standard is not applicable for
shipments by air, or by ship on a voyage other than a domestic…
Packing for Transportation of Dangerous Goods in United Nations Performance
Packagings
1. Scope
1.1 This standard sets out the requirements for packing for transport of
dangerous goods in packagings conforming to performance standards
established by the United Nations Committee of Experts on the Transport
of Dangerous Goods and Transport Canada. It does not cover dangerous
goods classed as explosives (Class 1), gases (Class 2), infectious…
Procedure for Measurement of Sound and Vibration Due to Blasting Operations
1. Scope
1.1 This Standard covers the procedures for the measurement of airborne sound (Clause 4) and ground-borne vibration (Clause 5) from blasting such as construction and quarrying. Note: This Standard should not be used for measurements of blasts underground without a full evaluation of the frequency content of the vibration, to be sure it falls within the limits of this Standard as…
Calibration specimens — Stylus instruments — Types, calibration and use of specimens
Specifies the characteristics of specimens for the calibration of stylus instruments and the annexes give information regarding their calibration and application to the calibration and adjustment in laboratories, standards rooms and workshops.
