Cereals and cereal products — Determination of moisture content (Basic reference method)
The method is not applicable to maize, for which an identical method is specified in the annex to ISO 6540. The method is idended to serve as a standard for checking and perfecting routine methods. It consists in , if necessary, grinding of a sample, after conditioning, if required, drying of a test portion under reduced pressure, at a temperatur between 45 and 50 C and in the presence of a…
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 6: Stat...
Establishes standard test procedures for measuring the performance of filters. It does not apply to filters for use in aeronautical applications. Includes the report of test results. Describes test rig and test liquid.
ANSI standard is adopted as International Standard 1989-1985 for the COBOL programming language. This second edition cancels and replaces the first edition (ISO 1989-1978).
ANSI standard is adopted as International Standard 1989-1985 for the COBOL programming language. This second edition cancels and replaces the first edition (ISO 1989-1978).
Nickel — Determination of silver, bismuth, cadmium, cobalt, copper, iron, manganese, lead and zinc c...
Applies to refined, wrought and cast nickel within the ranges specified in table 1. The method is applicable to the independent determination of any one or more of the elements listed. The lower level for iron can be extended to less than 0,0025 % (m/m) provided a special standard solution is prepared. The upper limit for the determination of cobalt and copper can be raised to 2 % (m/m) by a…
Essential oils — Analysis by gas chromatography on packed columns — General method
The Standard gives detailed information on all recurrent parameters, apparatus, products, methods and formulae for the analysis. In general a small quantity of essential oil is analyzed under specified conditions. If required different constituents are identified from their retention indexes. Quantitative determination of specific constituents is carried out by measurement of peak areas.
Oils of lemon and petitgrain citronnier, and oil of lime obtained by a mechanical process — Determin...
The method consists in analyzing a small quantity of essential oil on a column of small diameter but great length under specified conditions. The citral content is determined by using the internal standard method. Polyethylene glycol 20000 is used as stationary phase. Operating temperatures: Oven: linear temperature programming from 80 to 180 °C at a rate of 2 °C/min. Injection system: about 190…
Essential oils — Analysis by gas chromatography on capillary columns — General method
The Standard gives detailed information on all recurrent parameters, apparatus, products, methods and formulae for the analysis. The method consists in analyzing a small quantity of essential oil on a column of small diameter but great length, the inside wall of the column having been previously coated either directly with a specified stationary phase or with an impregnated support. If required…
1. Scope
1.1
This Standard applies to single- and multi-conductor Type RA90 cable having a
maximum temperature rating of 90°C in both dry and wet locations and intended
for installation in accordance with the Rules of the Canadian Electrical Code,
Part I, on systems having nominal voltages of 5000 V and less.
1.2
Type RA90 aluminum sheathed cables covered by this Standard consist of a…
1. Scope
1.1
This Standard applies to indoor or outdoor, open or enclosed shunt power
capacitors and assemblies of shunt power capacitors with associated
interconnections and supporting structures, for power factor improvement and
other applications on ac power systems having voltages up to 46 kV, designed to
be installed in accordance with the Rules of the Canadian Electrical Code, Part
I.
1.2…
