Quality requirements for welding — Resistance welding of metallic materials — Part 2: Elementary qua...
ISO 14554-2:2013 specifies requirements for the demonstration of the capability of a manufacturer or a sub-contractor to produce welded constructions, fulfilling specified quality requirements, in one or more of the following: a) a contract between involved parties; b) an application standard; c) a regulatory requirement.
The requirements contained within ISO 14554-2:2013 can be adopted in full…
Antennas, towers, and antenna-supporting structures
Scope
1.1 General
This Standard applies to structural antennas, towers, antenna-supporting structures, and roof- and wall-mounted structures, including their components, such as guys and foundations. It covers the structural design, fabrication, and erection of new structures and the modification of existing structures.
1.2 Exclusions
This Standard is not intended to apply to
a)…
Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials
ISO 3452-2:2013 specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. ISO 3452-2:2013 covers the temperature range 10 °C to 50 °C. Additional tests in ISO 3452-5:2008 or ISO 3452-6:2008 may be required outside this range.
On-site control tests and methods are detailed in ISO 3452‑1:2013.
Measurement of radioactivity in the environment — Soil — Part 7: In situ measurement of gamma-emitti...
ISO 18589-7:2013 specifies the identification of radionuclides and the measurement of their activity in soil using in situ gamma spectrometry with portable systems equipped with germanium or scintillation detectors.
ISO 18589-7:2013 is suitable to rapidly assess the activity of artificial and natural radionuclides deposited on or present in soil layers of large areas of a site under investigation…
Water quality — Radon-222 — Part 3: Test method using emanometry
ISO 13164-3:2013 specifies a test method for the determination of radon-222 activity concentration in a sample of water following its transfer from the aqueous phase to the air phase by degassing and its detection. It gives recommendations for rapid measurements performed within less than 1 h.
The radon-222 activity concentrations, which can be measured by this test method utilizing currently…
Water quality — Radon-222 — Part 1: General principles
ISO 13164-1:2013 gives general guidelines for sampling, packaging, and transporting of all kinds of water samples, for the measurement of the activity concentration of radon-222.
The test methods fall into two categories: a) direct measurement of the water sample without any transfer of phase (see ISO 13164‑2); b) indirect measurement involving the transfer of the radon-222 from the aqueous phase…
Industrial communication networks - Wireless communication networks - Part 2: Coexistence management
IEC 62657-2:2013 specifies the fundamental assumptions, concepts, parameters, and procedure for wireless communication coexistence; provides guidelines, requirements, and best practices for wireless communication's availability and performance in an industrial automation plant; it covers the life cycle of wireless communication coexistence and provides a common point of reference for…
B126 SERIES-13 - Water cisterns
Preface
This is the first edition of the CSA B126 Series of Standards, Water cisterns. It consists of the following Standards:
(a) CSA B126.0, General requirements and methods of testing for water cisterns;
(b) CSA B126.1, Installation of water cisterns;
(c) CSA B126.2, Commissioning and field inspection of water cisterns;
(d) CSA B126.3, Operation and…
Preface
This is the second edition of the CSA C448 Series, Design and installation of earth energy systems. It replaces CSA Group Standards, CAN/CSA-C445-M92, Design and Installation of Earth Energy Heat Pump Systems for Residential and Other Small Buildings, and C447-94, Design and Installation of Earth Energy Heat Pump Systems for Commercial and Institutional Buildings.
Since CAN/CSA-C445 and…
