Oils of citrus — Determination of CD value by ultraviolet spectrophotometric analysis
The absorbance curve of an ethanolic solution of the oil in the wavelength range from 220 to 440 nm is plotted and from this the CD value is determined. The CD value is the measure of segment CD, expressed in absorbance units for the exact mass of test portion specified in the International Standard appropriate to the essential oil concerned. The determination of segment CD is described in detail.
Acetic acid for industrial use — Methods of test — Part 4: Determination of acetaldehyde monomer con...
The principle of the determination consists in reaction of the acetaldehyde present in a test portion with an excess of sodium hydrogen sulphite solution, and iodometric titration of the residual sodium hydrogen sulphite. The method is applicable to products having acetaldehyde monomer contents equal to or greater than 0,01 % (m/m). This International Standard as also been approved by the…
Acetic acid for industrial use — Methods of test — Part 10: Visual limit test for heavy metals (incl...
The principle consists in conversion of heavy metals, such as lead, copper and iron, to their sulphides by treatment with sodium sulphide in ammoniacal solution, and visual comparison of the colour produced with that of a standard lead solution similarly treated. The method detects only the heavy metals present in non-complex form. Using a test portion of 25 g, the method is applicable directly…
Acetic acid for industrial use — Methods of test — Part 1: General
Gives general instructions and also specifies the methods to be used for the determination of dry residue after evaporation on a water bath, for the determination of the crystallizing point (temperature) of glacial acetic acid, for the determination of water content, for the measurement of colour and for the determination of arsenic content. The method is applicable to products having acedic acid…
Acetic acid for industrial use — Method of test — Part 2: Determination of acetic acid content — Tit...
The principle consists in titration of a test portion with standard volumetric sodium hydroxide solution, using phenolphthalein as indicator. Calculation of the acid content, making allowance for any formic acid present, determined separately (see ISO 753/3). This International Standard has also been approved by the International Union of Pure and Applied Chemistry (IUPAC). International…
Chromate conversion coatings on electroplated zinc and cadmium coatings
Specifies requirements relating to coatings intended to give protection against corrosion. Finishes for giving particular colours only or specifically to improve paint adhesion are not covered by this International Standard. Gives furhermore the method of application of chromate conversion coatings and a classification.
Cinematography — Projection reels/spools 75 to 312 mm diameter for 8 mm Type S motion-picture film —...
This International Standard specifies the dimensions for 8 mm Type S motion-picture projection reels/spools of 75 to 312 mm diameter (with the exception of the 75 mm Type No. 7) that are interchangeable on all types of reel-to-reel projection equipment. NOTE - The No. 7 reel (75 mm), although temporarily recognized, will be superseded by that specified in ISO 6033. lt is recommended that new…
