Rechercher

ISO 29022:2013 specifies a shear test method used to determine the adhesive bond strength between direct dental restorative materials and tooth structure, e.g. dentine or enamel. The method as described is principally intended for dental adhesives. The method includes substrate selection, storage and handling of tooth structure, as well as the procedure for testing.

ISO/ASTM 51275:2013 is a practice for using radiochromic film dosimetry systems to measure absorbed dose in materials irradiated by photons or electrons in terms of absorbed dose to water. Radiochromic film dosimetry systems are generally used as routine dosimetry systems. The radiochromic film dosimeter is classified as a Type II dosimeter on the basis of the complex effect of influence…

ISO/ASTM 51607:2013 covers dosimeter materials, instrumentation, and procedures for using the alanine-EPR dosimetry system for measuring the absorbed dose in the photon and electron radiation processing of materials. The system is based on electron paramagnetic resonance (EPR) spectroscopy of free radicals derived from the amino acid alanine. The alanine dosimeter is classified as a type I…

ISO/ASTM 51650:2013 is a practice for using a cellulose triacetate (CTA) dosimetry system to measure absorbed dose in materials irradiated by photons or electrons in terms of absorbed dose to water. The CTA dosimetry system is classified as a routine dosimetry system. The CTA dosimeter is classified as a type II dosimeter on the basis of the complex effect of influence quantities on its response…

ISO 16565:2013 specifies the methods to be used to determine the content of 5 ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers in the 0,1 % to 10 % range. ENB and DCPD are dienes introduced into ethylene-propylene rubbers to generate specific cure properties. Since high precision for diene content determination is important, a Fourier transform…

ISO 4211-2:2013 specifies a method for the assessment of the resistance to wet heat of all rigid furniture surfaces regardless of materials. It does not apply to leather and textile surfaces.

ISO 4211-3:2013 specifies a method for the assessment of the resistance to dry heat of all rigid furniture surfaces regardless of materials. It does not apply to leather and textile surfaces.

ISO 24531:2013 assists ITS standards developers and users of ITS standards who wish to use XML, by providing a consistent definition of the rules and rule references for the use of XML within ITS systems. ISO 24531:2013 defines consistent rules and rule references to provide a framework to be used when implementing XML-based applications in ITS, and particularly in specifying XML in ITS standards…

ISO 2698:2013 specifies dimensions necessary for the mounting of fuel injectors in diesel (compression-ignition) engines. The location of the fuel inlet and leak-off connections, and the dimensions of the clamp are not defined since they vary according to the particular application. ISO 2698:2013 applies to clamp-mounted injectors of types 7 and 28 made of an integral nozzle and nozzle holder…

L'ISO 105-B02:2013 spécifie une méthode pour la détermination de l'effet des coloris sur les couleurs des textiles de toute nature, à tous leurs stades de transformation, à l'action d'une source de lumière artificielle, représentative de la lumière naturelle du jour (D65). La méthode s'applique également aux textiles blancs (blanchis ou traités aux azurants optiques). La…